+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
 
Loading...
Technical Insight

Magazine Feature
This article was originally featured in the edition:
Issue 1 2024

Getting the full PICture: Testing microring resonators with sub-picometre spectral resolution

News

Microring resonators are key components in many PIC technologies, but, as their performance continues to improve, they require increasingly precise test and measurement solutions. EXFO’s testing platforms can help to address this need.

BY SOPHIE LANGE, BUSINESS DEVELOPMENT ENGINEER AT EXFO

AS THE FIELD of integrated photonics continues to advance, microring resonators have become a key enabler of this technology. The interferometric devices create very sharp spectral features, and can be used as ultra-sensitive detectors or as wavelength filtering devices in PIC-based low-linewidth tuneable lasers. They could also be used as compact and ultra-low voltage optical modulators, potentially proving to be a game-changer in the increasingly energy-hungry telecom and datacom industry.

As the name implies, a microring resonator consists of a ring-shaped waveguide placed close enough to a linear waveguide (or multiple linear waveguides) for some light to couple between them, creating a highly efficient optical resonator. The quality factor, or Q-factor, is a figure of merit of a device’s interferometric efficiency (the higher the Q-factor, the more efficient the device) and is directly linked to its spectral performance. With the development of low-loss structures and materials, interferometers based on integrated photonic ring resonators can achieve Q-factors of several million.

However, characterising devices like this is becoming more and more challenging. The spectral measurement of the Q-factor, among other performance parameters, needs to be tested with high accuracy and precision, but also within a short timespan, since a single integrated photonics wafer can count several thousands of these components.



Figure 2. Example of spectral characterisation instruments for the swept laser method, consisting of the tuneable laser (T200S/T500S from EXFO) and a bank of power meters integrated into a component testing platform (CTP10 from EXFO). (DUT represents the device under test.)


This article details the key challenges associated with measuring these ring resonator structures and provides insights into how to achieve fast, accurate, and highly resolved spectral characterisation of optical microring resonators. A measurement of a high Q-factor resonator, provided courtesy of CEA-Leti, demonstrates a path to efficient characterisation of these key components of PICs.

Spectral characteristics of microring resonators
The base pattern of a ring resonator’s transmission spectrum consists of a Lorentzian-shaped trough corresponding to a resonance of the ring cavity. This pattern is then repeated at an interval that corresponds to the free spectral range of the resonator. These high-contrast features depend strongly on the ring’s physical and optical properties and on effective interaction with the nearby linear waveguide(s).

In recent years, ring resonators with a Q-factor of several million have been demonstrated and readily used as modulators, filters, or sensors. Such Q-factor values roughly translate into a spectral resonance bandwidth of less than 1 picometre with optical peak depths of several decibels. When characterising such devices, the spectral position of the peak, spacing between peaks, and their height and width provide critical parametric information that can determine whether the cavity can be used for the intended application.



Figure 3. Spectral response of a high Q-factor ring resonator using resolutions of 1 picometre (red) and 20 femtometres (blue) measured with the CTP10 component testing platform. Device courtesy of CEA-Leti.

This, however, poses a difficult challenge when it comes to acquiring such a spectrum. Reliable readings of both wavelength and optical power information are needed while passing through these extremely high-contrast features. As a result, the test instrument requires femtometre-scale spectral resolution and needs to deal with power fluctuation of 10 dB per picometre.

The best technique to perform a fast, reliable, and high-resolution spectral measurement of ring resonators is to use a continuously tuneable laser together with one or more fast detectors. The laser needs to cover the relevant operating wavelength range while offering low linewidth and good spectral quality to avoid measurement artefacts. The detection part of the test system needs to have excellent linearity and enough dynamic range so that the full spectral contrast of the device can be captured in a single measurement without any distortion or discontinuity.

Additionally, the overall system needs excellent wavelength accuracy and repeatability as well as high spectral resolution to collect all the data points at the correct wavelength with femtometre-scale precision within seconds. Finally, polarisation control is often required to ensure coupling of the signal into the correct transmission mode.



Figure 4. Example of a mode splitting spectral event (on the same ring resonator as in Figure 3) at a spectral resolution of 20 femtometres measured with the CTP10 component testing platform. Device courtesy of CEA-Leti.

Efficient and fast spectral testing with femtometre resolution

Figure 2 shows a spectral characterisation solution where the component testing platform takes control of the laser and monitors the wavelength, power in, and power out of the device under test synchronously. Such systems have been demonstrated to also capture return loss and polarisation-dependent loss measurements and to provide high-quality spectral performance required for ring resonator testing.

Figure 3 shows a measurement performed on a ring resonator device with a Q-factor of 6 million, provided by CEA-Leti. The graph demonstrates the accuracy level achieved with the high-resolution mode of the test solution used in this case. Thanks to an “on-the-fly” optical wavelength detection, the laser wavelength is precisely determined at each tuning step, avoiding any measurement inaccuracies due to factors such as laser speed variation. Together with the fast, high-dynamic-range photodetectors, the Lorentzian shape of the resonance is spectrally resolved without any distortions or artefacts.

A system like this also provides highly repeatable measurements, ideal for characterising the resonance position versus other ring resonator parameters such as the applied voltage for phase-shift or thermal control. As a matter of fact, the system’s femtometre-scale acquisition allows the resolution of complex behaviour such as a mode splitting effect – a spectral event observed when defects in the ring create counter-propagating modes, resulting in two resonant peaks instead of one, as shown in Figure 4.

Ring resonators and integrated photonics as a whole are pushing the boundaries of spectral testing, as well as photonics measurement techniques more generally. Ever-increasing Q-factors require higher and higher spectral precision and resolution, and minimised testing time. This is a challenging but exciting time for test and measurement engineers and researchers alike.Main Image:. A ring resonator consists of a ring-shaped waveguide close to a linear waveguide. Picture courtesy of CEA-Leti

Moving towards polarisation-independent monolithic PICs
UK joins EU’s Chips Joint Undertaking programme
Sarcura secures €1.7 million grant from Austrian Research Promotion Agency
The best of both worlds: Design freedom and IP protection
Getting the full PICture: Testing microring resonators with sub-picometre spectral resolution
Lessengers announces portfolio of 800G optics for AI/ML
PhotonDelta and Optics Netherlands launch new “MasterPlus” programme
Marvell CTO receives David Richardson Medal from Optica
Compact chips for converting light into microwaves
Polymer-based material coating with tuneable optical properties
Rose-Hulman Institute of Technology launches NanoEngineering programme
Skorpios Technologies announces additional funding to complete relocation
Quantum Computing Inc. announces new quantum optimisation machine
Microwave chip performs ultrafast signal processing
EU consortium invites design proposals for edge-AI technologies
On-chip optical tweezers combat antibiotic resistance
Incorporating quantum dots into nanowire arrays
Scintil integrates III-V DFB lasers and amplifiers with silicon
Vodafone and iPronics showcase photonic radio unit at Mobile World Congress
Artilux reports a milestone in germanium-silicon photonics technology
Aehr receives orders totalling $23 million for test and burn-in products
DustPhotonics raises $24 million in follow-on funding round
Kumamoto plant opening poised to shape Japan’s semiconductor landscape
Improved on-chip integration of single-photon sources
New compact light source achieves 224G per channel
Coherent CEO to step down
Chip uses light to perform calculations needed for AI
New technique enables efficient integration of III-V with silicon
BluGlass and Applied Energetics sign memorandum of understanding
University of Twente aims to scale photonic quantum computing
Amazec Photonics awarded €1.5 million for PIC-based medical tech
Cisco and Microsoft deliver 800G on Amitié Transatlantic Cable

×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
×