Loading...
Technical Insight

Magazine Feature
This article was originally featured in the edition:
Issue 5 2026

End-to-end nanoimprint lithography technology for photonic integration

News

Nanoimprint lithography enables high-precision, repeatable fabrication of micro-optics for photonic integration, with inkjet coating and accurate alignment supporting scalable manufacturing for CPO, microLEDs and VCSELs.

BY Andrea Kronawitter, Business Development Manager, EV Group


The rapid growth of optical interconnects, co-packaged optics (CPO), and AI-driven data infrastructure is accelerating the demand for highly precise and scalable micro-optical components. As photonic integration continues to increase, optical elements must not only deliver superior performance, but also be manufactured with the accuracy, throughput, and cost efficiency required for high-volume production.

Key components enabling advanced photonic integration include micro lens arrays (MLAs), diffractive optical elements, beam-shaping structures, and optical coupling features that improve light collection, transmission efficiency, and optical alignment. These optical structures are used in applications ranging from CPO to microLED displays, vertical-cavity surface-emitting laser (VCSEL) arrays, distributed-feedback (DFB) lasers, and photodetectors.

Standard optical lithography excels at manufacturing planar electronic devices through layer-by-layer patterning, but it is less suited for fabricating the three-dimensional structures that are essential for controlling light. Nanoimprint lithography (NIL) addresses this challenge by directly replicating micro- and nanostructures from a patterned mold into a functional imprint material. Unlike traditional lithographic approaches, NIL enables the formation of true three-dimensional optical structures in a single patterning step.

Advantages of nanoimprint lithography for photonics
The ability to replicate 3D structures is particularly valuable for photonic applications, where optical performance depends strongly on surface geometry, curvature, aspect ratio, and shape accuracy. Structures such as micro lenses, coupling elements, mirrors, beam-shaping optics, and freeform optical surfaces can be replicated with exceptional fidelity while maintaining high throughput and excellent wafer-to-wafer repeatability (Figure 1).


Figure 1: Various types of 3D structures that can be replicated with exceptional fidelity using nanoimprint lithography (Source: EVG).

In addition, NIL is not constrained by the sophisticated optical projection systems required in advanced photolithography. As a result, it represents one of the most cost-effective approaches for manufacturing nanoscale and microscale structures across large substrate areas.

Compared with alternative fabrication techniques such as diamond turning, laser direct writing, or electron-beam lithography, NIL offers significant advantages in scalability, throughput, and cost of ownership while maintaining sub-micron resolution and excellent pattern fidelity [1]. The technology has already been proven as a high-volume-manufacturing capability in consumer optical sensors and AR waveguide manufacturing, and it is increasingly being adopted for advanced photonic packaging applications [2].

Inkjet coating enhances NIL performance
The performance of a nanoimprint process is strongly influenced by resist thickness uniformity and residual layer control. Variations in the residual layer can adversely affect both optical functionality and subsequent pattern transfer processes, particularly when NIL structures are used as etch masks (also referred to as sacrificial NIL).

To address these challenges, NIL can be combined with advanced inkjet coating technology. Rather than applying a continuous resist layer across the entire wafer, precisely metered droplets of imprint material are deposited only where material is required. This selective deposition approach enables highly uniform material distribution while significantly improving control over the residual layer thickness. The result is greater flexibility for different structure designs and substantially reduced material consumption.


Figure 2: MLA Master produced via reflow (Source: EVG).

High-precision optical packaging for microLEDs and VCSELs
A key benefit of NIL is the ability to integrate optical structures with precise alignment relative to existing device features. Accurate imprinting of optical coupling elements onto silicon photonic devices, VCSELs, and microLED emitters is essential for maximizing optical efficiency and overall device performance.

To demonstrate this capability, EV Group (EVG) began a feasibility study at its NILPhotonics® Competence Center, an open-access innovation incubator and process development facility located at its headquarters in St. Florian, Austria. First, EVG fabricated an EVG MLA reflow master, a highly precise patterned template containing lenses surrounded by bonding frames (Figure 2). Because NIL replicates the structures defined by the master, the quality of the master directly influences the quality of the resulting imprints. Any aberrations or unwanted surface roughness in the master can also be replicated during the imprint process, making high-quality master fabrication crucial to achieving the desired optical structures.

To produce the master, an EVG6200 mask alignment system was used to form pillars, followed by a reflow process to form extremely small (<5µm) lenses. Additionally, inkjet coating was applied for selective area coating to prevent the NIL polymer from covering electrical connecting points.


Figure 3: EVG UV-NIL process flow.

This master was then subsequently used for creating multiple imprints. As shown in Figure 3, the UV-NIL process involves pressing a patterned mold (working stamp) into the UV-curable resin. Once the resist has conformed to the molded topography, exposure to light solidifies the material. Subsequently, the mold is released, leaving behind a precise replica of the original structure.

The results of the study demonstrated that NIL technology enables imprinting of MLAs with a height of approximately 5µm with sub-micrometer alignment accuracy across the entire wafer, allowing precise MLA placement directly above individual microLED pixels. Such alignment performance is critical for these technologies, where even small placement errors can significantly impact optical efficiency and image quality.

The resist was coated via inkjet coating. Using inkjet coating, the residual layer thickness can be tailored to specific customer layouts and optical requirements, with the study demonstrating thicknesses of approximately 1.1 µm and 3.5 µm (Figure 4). Such precise control over residual layer thickness is also important for other photonic applications requiring sacrificial NIL processes, where a thin and uniform residual layer is essential for reliable downstream etching.


Figure 4: Lenses with residual layer thicknesses of approximately 1.1 µm and 3.5 µm (Source: EVG).

In addition, the feasibility study focused on achieving a low surface roughness, which is important for minimizing unwanted light scattering and maintaining optical performance. A constant lens surface roughness of less than 10-nm RMS was achieved, with results across 10 imprints demonstrating the high reproducibility of the NIL process (Figure 5).


Figure 5: Lens surface roughness and height over 10 imprints, demonstrating high reproducibility (Source: EVG).

Taken together, these process capabilities contribute to more consistent device performance and enable the fabrication of highly uniform optical structures across the entire substrate, supporting both high-yield manufacturing and scalable production.

A unique capability of NIL is the simultaneous fabrication of optical and other support structures of different heights within a single imprint step. In addition to the MLA structures themselves, bonding frames have been replicated concurrently during the same process cycle (Figure 6). This eliminates additional lithography and alignment steps, simplifies the overall process flow, and improves manufacturing efficiency while maintaining high placement accuracy between optical and mechanical features.

Figure 6: MLAs and bonding frames imprinted in the same process step (Source: EVG).


Beyond microLED packaging, the same manufacturing approach can be applied to VCSEL arrays, where accurately aligned micro-optics improve beam shaping, optical coupling efficiency, and overall system performance. NIL therefore provides a versatile platform for a broad range of photonic packaging applications.

End-to-end process development from master to device
A key differentiator of EVG’s approach is the ability to provide a complete NIL ecosystem. Rather than focusing solely on the replication step, EVG supports the entire process chain, including in-house master fabrication, working stamp replication, imprint process development, material optimization, dedicated equipment, and process transfer to manufacturing. Having these capabilities available within a coordinated process development environment can be particularly important for advanced photonics applications, where, for example, specialized requirements may make it difficult to source suitable masters for high-resolution structures and extremely small lenses. Through its NILPhotonics Competence Center, EVG provides in-house master fabrication as part of the overall process development flow. This enables customers to significantly reduce development cycles while ensuring seamless process integration from R&D to high-volume manufacturing.

Materials development provides another example of the benefits of this integrated approach. By bringing materials development and process optimization together within the same development environment, EVG can more quickly optimize materials and process parameters to meet the requirements of specific NIL applications. At the same time, EVG maintains an open materials platform that enables it to work with third-party materials suppliers as well as leverage its in-house materials development capabilities.

This end-to-end approach also enables multiple process requirements to be addressed together as photonic devices move toward greater levels of integration. For example, the study described here demonstrates the simultaneous fabrication of optical and bonding frame structures of different heights, with MLAs and bonding frames replicated within the same process step. EVG can also leverage expertise developed through its wafer bonding business in areas such as high-accuracy alignment and process control and apply this know-how to NIL to support deeper integration of NIL into photonic device and packaging processes. This cross-functional expertise becomes increasingly important as advanced NIL applications require more demanding alignment accuracy performance.

Conclusion
As photonic integration expands to support applications such as CPO and optical interconnects, manufacturers will increasingly need processes that can translate complex optical designs into high-volume production while meeting demanding performance requirements. This includes the ability to fabricate high-resolution 3D structures with precise alignment, while maintaining consistent surface roughness and residual layer thickness with high reproducibility from wafer to wafer.

Nanoimprint lithography provides a scalable manufacturing approach capable of meeting these requirements, but achieving the necessary precision, repeatability and process control requires more than imprint equipment alone. It requires expertise across the complete process flow, from master and stamp development through materials, coating, imprinting and process transfer to manufacturing. Building on decades of NIL experience and the process-development capabilities of its NILPhotonics Competence Center, EVG provides this end-to-end approach. The micro lens array study described here demonstrates how these capabilities can be combined to achieve the precision, repeatability and process control needed to move advanced photonic devices from development toward high-volume manufacturing.



Logo
x