+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
 
Loading...
News Article

Generating awkward wavelengths with nanowire lasers

News

Chinese and Australian reseachers propose that the working wavelength of nanowire lasers could be expanded using self-frequency conversion

Nanowire lasers have been demonstrated in a variety of materials, such as III-V and II-VI compound semiconductors, and perovskites. And the introduction of quantum wells and quantum dots in nanowires can further reduce the lasing threshold and improve the temperature stability of nanowire lasers.

Unfortunately, there are still some awkward wavelengths that cannot be achieved from nanowire lasers. Although the emission peaks of semiconductor nanowire could theoretically be shifted over a broad range by controlling the alloy composition, there are many material-related challenges to the nanowire growth. For example, green InGaN nanowire lasers are still not realised due to the high density of dislocations in the high-indium content quantum well.

In a new paper published in Light Science & Application, Chinese scientists collaborating with Australian reseachers have proposed that the working wavelength of nanowire laser could be expanded by using the second-order nonlinear effect of nanowire crystal. However, unlike traditional solutions using an external non-linear crystal, the proposed solution exploits the high non-linearities of III-V nanowire itself and the strongly localised optical field within the laser cavity to achieve frequency conversion (as shown in Figure 1 above). And the second-order nonlinear optical processes could be self-realised effectively. Note, it is impractical to employ nanowire lasers as the source to pump another nonlinear crystal to achieve frequency conversion due to the low output power of nanowire lasers.

The team included a research group led by Xuetao Gan and Jianlin Zhao from Key Laboratory of Light Field Manipulation and Information Acquisition, and Shaanxi Key Laboratory of Optical Information Technology, School of Physical Science and Technology, Northwestern Polytechnical University, China and their collaborators at the ARC Centre of Excellence for Transformative Meta-Optical Systems, Research School of Physics, The Australian National University, Canberra, ACT, 2601, Australia.

In their experiment, high-quality GaAs/In0.16Ga0.84As core/shell nanowires were grown by selective area epitaxy (SAE) method and transferred to a SiO2/Si substrate. The two flat end facets function as two parallel mirrors, and form a Fabry–Pérot cavity as the optical cavity for the laser. From a nanowire with a single lasing mode at 1016 nm, a strong visible lasing peak at 508 nm is also obtained. By analysing the far-field polarisation dependence with numerical modelling and the intensity dependence, it is confirmed that the visible laser mode at 508 nm is generated via doubling the frequency of the fundamental lasing mode (SHG), i.e., the self-frequency-conversion process.

Besides SHG, the second-order nonlinear effect of III-V nanowires also supports other three-wave mixing processes, which could also be used to extend the output wavelength of nanowire lasers. In the experiment, multimode lasing in near-infrared is demonstrated in a nanowire with larger diameter, and multiple lasing peaks are obtained in the visible wavelength range .

The authors believed that by exploiting the second nonlinear effect of the nanowires, the proposed self-frequency-conversion nanowire lasers provide a new path for expanding the working wavelength of these lasers, with potentially applications in optical parametric generators, amplifiers, and oscillators operating over a large wavelength range from deep ultraviolet to THz.

'Self-frequency-conversion nanowire lasers' by Yi, R., Zhang, X., Li, C. et al.. Light Sci Appl 11, 120 (2022).

UniversityWafer announces new supply silicon-on-insulator substrates
Paratus deploys Infinera GX Series in superhighway network
The first universal, programmable, multifunctional photonic chip
Intel Ignite launches its European cohort of Spring 2024
A large-scale photonic chiplet to power artificial general intelligence
Aeva creates Automotive Center of Excellence in Germany
Luceda Photonics releases new Test Design Kit
PhotonVentures’ second fundraising round brings total to €75 million
New edition of IPSR-I photonics roadmap published
Luceda Photonics and Alter Technology collaborate on PIC assembly
Alcyon Photonics and Applied Nanotools collaborate on photonics PDK
Aire Networks deploys Infinera’s ICE-X pluggable solution
Nexus participates in airborne hazard detection project
CMC Microsystems and ventureLAB support semiconductors in Canada
Startups selected for Luminate NY accelerator announced
POET and MultiLane partner on transceivers
Rapid Photonics receives €300,000 for lithium niobate PIC production
Lumentum announces improvements to 800ZR+ transceivers
Teramount and GlobalFoundries cooperate on silicon photonics
StarIC teams up with GlobalFoundries on silicon photonics
Marvell demonstrates 200G 3D silicon photonics engine
Alphawave Semi and InnoLight collaborate on linear pluggable optics
NewPhotonics introduces PIC with integrated optical equaliser
Pilot Photonics secures €2.5 million from European Innovation Council
Ranovus collaborates with MediaTek on 6.4T co-packaged optics
Stellantis Ventures invests in SteerLight silicon photonics LiDAR
Semilux launches programme to develop LiDAR for autonomous vehicles
Coherent recognises Tower Semiconductor with Outstanding Innovation and Technology Supplier Award
photonixFAB Consortium now open for first prototyping
Roadmap to drive PIC industry forward unveiled
European quantum experts team up on photonic quantum computing
OpenLight Partners with VLC Photonics to Expand Design and Test Capacity

×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
×
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • View all news 22645 more articles
Logo
×
Register - Step 1

You may choose to subscribe to the PIC Magazine, the PIC Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: