Info
Info
News Article

Columbia Team Controls Light Phrase Using 2D Materials

News

Researchers manipulate the phase of light without changing its amplitude, at extremely low power loss

Silicon nanophotonics has made great strides in the fields of optical data communications, phased arrays, LIDAR, and quantum and neural circuits, but there are two major concerns for large-scale integration of photonics into these systems: their ever-expanding need for scaling optical bandwidth and their high electrical power consumption.

Existing bulk silicon phase modulators can change the phase of an optical signal, but this process comes at the expense of either high optical loss (electro-optic modulation) or high electrical power consumption (thermo-optic modulation). Now, a Columbia University team, led by Michal Lipson, Eugene Higgins professor of Electrical Engineering and professor of applied physics at Columbia Engineering, have announced that they have discovered a new way to control the phase of light using 2D semiconductor materials without changing its amplitude, at extremely low electrical power dissipation.

In this new study, published by Nature Photonics, the researchers demonstrated that by simply placing the thin material on top of passive silicon waveguides, they could change the phase of light as strongly as existing silicon phase modulators, but with much lower optical loss and power consumption.

"Phase modulation in optical coherent communication has remained a challenge to scale, due to the high optical loss that was associated with phase change," says Lipson. "Now we've found a material that can change the phase only, providing us another avenue to expand the bandwidth of optical technologies."

The optical properties of semiconductor 2D materials such as transition metal dichalcogenides (TMDs) are known to change dramatically with free-carrier injection (doping) near their excitonic resonances (absorption peaks). However, very little is known about the effect of doping on the optical properties of TMDs at telecom wavelengths, far away from these excitonic resonances, where the material is transparent and therefore can be leveraged in photonic circuits.

The Columbia team, which included James Hone, Wang Fong-Jen Professor of Mechanical Engineering at Columbia Engineering, and Dimitri Basov, professor of physics at the University, probed the electro-optic response of the TMD by integrating the semiconductor monolayer on top of a low-loss silicon nitride optical cavity and doping the monolayer using an ionic liquid. They observed a large phase change with doping, while the optical loss changed minimally in the transmission response of the ring cavity. They showed that the doping-induced phase change relative to change in absorption for monolayer TMDs is approximately 125, which is significantly higher than that observed in materials commonly employed for silicon photonic modulators including Si and III-V on Si, while being simultaneously accompanied by negligible insertion loss.

"We are the first to observe strong electro-refractive change in these thin monolayers," says the paper's lead author Ipshita Datta, a PhD student with Lipson. "We showed pure optical phase modulation by utilising a low loss silicon nitride (SiN)-TMD composite waveguide platform in which the optical mode of the waveguide interacts with the monolayer. So now, by simply placing these monolayers on silicon waveguides, we can change the phase by the same order of magnitude, but at 10000 times lower electrical power dissipation. This is extremely encouraging for the scaling of photonic circuits and for low-power LIDAR."

The researchers are continuing to probe and better understand the underlying physical mechanism for the strong electrorefractive effect. They are currently leveraging their low-loss and low-power phase modulators to replace traditional phase shifters, and therefore reduce the electrical power consumption in large-scale applications such as optical phased arrays, and neural and quantum circuits.

'Low-loss composite photonic platform based on 2D semiconductor monolayers' by Ipshita Datta et al; Nature Photonics 2020



2nd November 2020 - 10am GMT (Live event)
4th November 2020 – 10am CTT (Recorded)
6th November 2020 – 10am PST (Recorded)


Following on from the successful launch of the virtual AngelTech Online Summit in May 2020, we are delighted to announce AngelTech Live II, taking place on 2 November 2020. AngelTech will once again consist of our established events of CS International and PIC International.

The 2nd virtual summit will utilise an enhanced event engine, integrating presentations, digital sponsors booths and the networking tools into one portal – allowing for live chat between delegates, speakers and sponsors.

The event will take the form of three interactive sessions over 1 day and will be a must attend live summit consisting of:

  • Analyst talks
  • Industrial research
  • End user presentations
  • Dedicated breakout room for partner presentations

MORE INFO     REGISTER FOR FREE     WATCH OUR MAY EVENT ON-DEMAND

Info
×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
×
Logo
×
Register - Step 1

You may choose to subscribe to the PIC Magazine, the PIC Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in:
 
X
Info
X
Info
{taasPodcastNotification}