+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
 
Loading...
News Article

Harvard team's metasurface opens up new ways of using light

News

Device can be designed so any input polarisation of light can result in any orbital angular momentum output to produce any kind of structured light

Over the last decade, applied physicists have developed nanostructured materials that can produce completely new states of light exhibiting strange behavior, such as bending in a spiral, corkscrewing and dividing like a fork.

These structured beams not only can tell us lot about the physics of light, they have wide range of applications from super resolution imaging to molecular manipulation and communications.

Now, researchers at the Harvard John A. Paulson School of Engineering and Applied Sciences have developed a tool to generate new, more complex states of light in a completely different way. The research is published in Science.

"We have developed a metasurface which is a new tool to study novel aspects of light," said Federico Capasso, the Robert L. Wallace Professor of Applied Physics and Vinton Hayes Senior Research Fellow in Electrical Engineering at SEAS and senior author of the paper.

"This optical component makes possible much more complex operations and allows researchers to not only explore new states of light but also new applications for structured light."

The Harvard Office of Technology Development has protected the intellectual property relating to this project and is exploring commercialisation opportunities.

The new metasurface connects two aspects of light, known as orbital angular momentum and circular polarisation (or spin angular momentum). Polarisation is direction along which light vibrates. In circularly polarised light, the vibration of light traces a circle.

The fact that light can even carry orbital momentum is a relatively recent discovery "” only about 25 years old "” but it's this property of light which produces strange new states, such as beams in the shape of corkscrews.

Previous research has used the polarisation of light to control the size and shape of these exotic beams but the connection was limited because only certain polarisations could convert to certain orbital momentums. This research, however, significantly expands that connection.

"This metasurface gives the most general connection, through a single device, between the orbital momentum and polarisation of light that's been achieved so far," said Robert Devlin, co-first author of the paper and former graduate student in the Capasso Lab.

The device can be designed so that any input polarisation of light can result in any orbital angular momentum output "” meaning any polarisation can yield any kind of structured light, from spirals and corkscrews to vortices of any size. And, the multifunctional device can be programmed so that one polarisation results in one vortex and a different polarisation results in a completely different vortex.

Completely new kind of optical component

"This is a completely new optical component," said Antonio Ambrosio, principal scientist at Harvard Center for Nanoscale Systems (CNS) and co-first author of the paper.

"Some metasurfaces are iterations or more efficient, more compact versions of existing optical devices but, this arbitrary spin-to-orbital conversion cannot be done with any other optical device. There is nothing in nature as well that can do this and produce these states of light."

One potential application is in the realm of molecular manipulation and optical tweezers, which use light to move molecules. The orbital momentum of light is strong enough to make microscopic particles rotate and move.

"You can imagine, if we illuminate the device with one polarisation of light, it will create a force of a particular kind," said Ambrosio. "Then, if you want to change the force, all you need to do is change the polarisation of the incoming light. The force is directly related to the design of the device."

Another application is high-powered imaging. The black hole in the centre of the vortex, known as the zero-light intensity region, can image features smaller than the diffraction limit, which is usually half of the wavelength of light. By changing the polarisation of light, the size of this centre region can be changed to focus different-sized features.

But these beams can also shed light on fundamental questions of physics.

"These particular beams are first and foremost of fundamental scientific interest," said Noah Rubin, co-first author of the paper and graduate student in the Capasso Lab.

"There is interest in these beams in quantum optics and quantum information. On the more applied side, these beams could find application in free-space optical communication, especially in scattering environments where this is usually difficult. Moreover, it has been recently shown that similar elements can be incorporated into lasers, directly producing these novel states of light. This may lead to unforeseen applications."

The paper was co-authored by J.P. Balthasar Mueller and supported in part by the Air Force Office of Scientific Research.

UniversityWafer announces new supply silicon-on-insulator substrates
Paratus deploys Infinera GX Series in superhighway network
The first universal, programmable, multifunctional photonic chip
Intel Ignite launches its European cohort of Spring 2024
A large-scale photonic chiplet to power artificial general intelligence
Aeva creates Automotive Center of Excellence in Germany
Luceda Photonics releases new Test Design Kit
PhotonVentures’ second fundraising round brings total to €75 million
New edition of IPSR-I photonics roadmap published
Luceda Photonics and Alter Technology collaborate on PIC assembly
Alcyon Photonics and Applied Nanotools collaborate on photonics PDK
Aire Networks deploys Infinera’s ICE-X pluggable solution
Nexus participates in airborne hazard detection project
CMC Microsystems and ventureLAB support semiconductors in Canada
Startups selected for Luminate NY accelerator announced
POET and MultiLane partner on transceivers
Rapid Photonics receives €300,000 for lithium niobate PIC production
Lumentum announces improvements to 800ZR+ transceivers
Teramount and GlobalFoundries cooperate on silicon photonics
StarIC teams up with GlobalFoundries on silicon photonics
Marvell demonstrates 200G 3D silicon photonics engine
Alphawave Semi and InnoLight collaborate on linear pluggable optics
NewPhotonics introduces PIC with integrated optical equaliser
Pilot Photonics secures €2.5 million from European Innovation Council
Ranovus collaborates with MediaTek on 6.4T co-packaged optics
Stellantis Ventures invests in SteerLight silicon photonics LiDAR
Semilux launches programme to develop LiDAR for autonomous vehicles
Coherent recognises Tower Semiconductor with Outstanding Innovation and Technology Supplier Award
photonixFAB Consortium now open for first prototyping
Roadmap to drive PIC industry forward unveiled
European quantum experts team up on photonic quantum computing
OpenLight Partners with VLC Photonics to Expand Design and Test Capacity

×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
×
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • View all news 22645 more articles
Logo
×
Register - Step 1

You may choose to subscribe to the PIC Magazine, the PIC Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: